BEAVER 650 Model, Ecomet Truck Mounted Hydraulically Operated Water Well Drilling Rig can capable of drilling from 4.5” to 6” Dia. Bore Holes in different formations such as hard rock by DTH method & Unconsolidated / alluvial formations using water / foam flush by Rotary method up to a depth of 200 Meters (500 Ft.)
Under favorable Drilling Conditions. The hydraulic pumps shall be powered by either same pickup engine through PTO or by a separate diesel drive deck engine.
S.No | Product | Description |
---|---|---|
1 | Capacity of Drilling | 4.5” to 6” Drilling to a depth of 200 mtrs. (650 feet) |
2 | Prime mover of the hydraulic pumps | Truck Engine / Deck Engine of suitable capacity |
3 | Hydraulic Pumps used | Radial Piston Pumps & Gear / Vane Pumps |
4 | Maximum operating pressure | 180 Bar |
5 | Hydraulic oil tank capacity | 400 Ltrs. |
6 | Mast Construction | Channel Structure |
7 | Mast | Suitable to handle 10ft. pipes |
8 | Centralizer opening | 270mm |
9 | Pull up force | 8500kg |
10 | Pull-down Force | 4500 Kgs |
11 | Pull-up Speed | 45 Mtrs/min |
12 | Max. Torque | 280 Kg-m |
13 | Rotation Speed | 0-100 Rpm |
14 | Hydraulic Jacks (Stabilizers) | 4 Nos. of Ø100x63x610 Stroke |
15 | Break-out wrench (to open the drill joints) | Ø80x300 Stroke |
16 | Water Injection Pump | 36 LPM @ 40 Bar |
17 | Airline Lubricator capacity | 15 Ltrs. |
18 | Auxiliary Winch | 1000 Kgs |
19 | Suitable Air Compressor | 450cfm, 150psi (or) 650cfm, 200psi |